Blancetox

Wagner HT775 Information The Wagner HT775 is a heavy-duty heat gun that is perfect for a variety of tasks, including stripping paint, shrinking heat shrink tubing, and bending plastic. It features a variable temperature setting from 750 to 1000 degrees Fahrenheit, a die-cast metal housing for durability, and a replaceable heating element for long life. Specifications

Megger MIT410/2 Information The Megger MIT410/2 is a CAT IV insulation tester that is designed for a wide range of electrical and industrial applications. It is ideal for testing electrical installations, cable testing, motor testing, testing cars and other vehicles, avionics and much more. The MIT410/2 features a number of improvements over the previous model, including: A redesigned case with back stand and a 6 cell battery compartment with separate fuse access. Feedback controlled test voltages to limit overvoltage to 2% rather than the industry standard 10-20%. Polarization index (PI) and dielectric absorption ratio (DAR) functions. A bright, backlit LCD display with large digits and clear symbols. A range of test voltages from 50V to 1000V. A maximum insulation resistance of 200GΩ. A CAT IV 600V rating, making it safe to use on live circuits. The MIT410/2 is a versatile and easy-to-use insulation tester that is ideal for a wide range of applications. It is built to last and comes ...

Metabo KGS 315 Plus Information The Metabo KGS 315 Plus is a powerful and versatile miter saw that is ideal for a wide range of woodworking projects. It features a powerful 1600-watt motor that delivers smooth, accurate cuts through a variety of materials, including wood, plastic, and aluminum. The saw's rotating table and inclinable saw head allow for precise cuts at a variety of angles, and the sliding function provides additional cutting capacity for wider workpieces. The KGS 315 Plus also features a dust extraction port and a built-in laser guide for clean, accurate cuts. Here is an overview of the Metabo KGS 315 Plus miter saw: Powerful 1600-watt motor: Delivers smooth, accurate cuts through a variety of materials Rotating table and inclinable saw head: Allows for precise cuts at a variety of angles Sliding function: Provides additional cutting capacity for wider workpieces Dust extraction port: Helps to keep your work area clean Built-in laser guide: Provides a visual re...

Uniden DFR1 Information The Uniden DFR1 is an affordable radar/laser detector with reliable and proven performance. It features a long range laser detector and an easy-to-read color icon display with signal strength meter bars. The DFR1 also offers 360° protection, so you can be alerted to threats from all directions. Image of Uniden DFR1 radar detector Specifications

Einhell GC-PC 1235 I Information the information about the Einhell GC-PC 1235 I petrol chainsaw: Introduction The Einhell GC-PC 1235 I is a powerful and versatile petrol chainsaw that is ideal for a variety of home and garden tasks. It is equipped with a 35cc, 2-stroke engine that delivers 2.2kW of power, making it capable of cutting through branches, logs, and other types of wood with ease. The chainsaw also features a number of safety features, such as a kickback protection system and an automatic chain brake, to help prevent accidents.

Hitachi DH 28PMY Information the information about the Hitachi DH 28PMY rotary hammer: Introduction The Hitachi DH 28PMY is a powerful and versatile rotary hammer that is perfect for a variety of drilling and chiseling applications. It features a 850-watt motor that delivers up to 28mm of drilling capacity in concrete, making it ideal for heavy-duty work. The DH 28PMY also has a three-function selector switch that allows you to choose between drilling, impact drilling, and chiseling, giving you the flexibility to tackle a wide range of projects.

DeWalt DCN660D1 Information The DeWalt DCN660D1 is a 20V MAX XR cordless angled finish nailer that is perfect for fastening crown molding, casing, and baseboards. It features a brushless motor that delivers up to 3,000 nails per charge and 2x longer runtime than comparable tools. The nailer also has a tool-free depth adjustment for precise countersinking, a tool-free jam release for quick and easy clearing of jams, and a multi-functional LED light for both workspace illumination and tool diagnostics. Here is a table of the full specifications of the DeWalt DCN660D1: Feature Spec Voltage 20V MAX XR Nail gauge 16 gauge Nail length 1-1/4" to 2-1/2" Nail drive speed Up to 3,000 nails per charge Runtime Up to 800 nails per charge (2.0Ah battery) Dust collection Yes Weight 5.7 lbs Here are some of the features of the DeWalt DCN660D1:

Westfalia A2S18 Information The Westfalia A2S18 is a 18 Volt Li-Ion 2-Gang Akkuschrauber with a stufenlose Drehzahlregulierung, a 2 Gang Getriebe, Rechts-/Linkslauf, an ergonomischer, rutschsicherer 2-Komponentengriff, 19 Drehmomentstufen plus Bohrstufe, and Schnellspannbohrfutter 10 mm. It is a powerful and versatile tool that can be used for a variety of tasks in the home, workshop, and garden. Image of Westfalia A2S18 Akkuschrauber Specifications

Metabo KHEV 5-40 BL Information The Metabo KHEV 5-40 BL is a professional-grade combination hammer that combines the power of a hammer drill with the versatility of a chipping hammer. It is powered by a brushless motor that delivers 1150 watts of power and 8.7 joules of impact energy, making it capable of handling even the toughest demolition tasks. The KHEV 5-40 BL also features Metabo's VibraTech (MVT) vibration dampening system, which helps to reduce fatigue and improve user comfort during extended use. Image of Metabo KHEV 5-40 BL Specifications

Scheppach CID40-20Li Information the Scheppach CID40-20Li information you requested: Introduction The Scheppach CID40-20Li is a cordless impact driver that is perfect for a variety of tasks around the home and workshop. It is powered by a 20V lithium-ion battery, which provides enough power for most applications. The CID40-20Li has two speed settings, so you can choose the right speed for the job. It also has a variable torque control, so you can adjust the amount of torque for different screw sizes and materials.

Defort DMM-1000N Information The Defort DMM-1000N is a digital multimeter that is designed for a variety of electrical measurement tasks. It features a large, backlit LCD display that makes it easy to read readings in any lighting conditions. The DMM-1000N also has a variety of measurement functions, including AC/DC voltage, AC/DC current, resistance, capacitance, and diode testing. Image of Defort DMM-1000N multimeter Here is a table of the full specifications of the Defort DMM-1000N:

Makita BFT083F Information The Makita BFT083F is a cordless impact driver that is designed for light to medium-duty screwdriving applications. It is powered by a 10.8V Li-Ion battery pack and features a brushless motor for increased power and runtime. The BFT083F has a maximum torque of 30Nm and can drive screws up to 6mm in diameter. It also features a two-speed transmission with a reversing switch, a LED work light, and an adjustable torque clutch. Image of Makita BFT083F cordless impact driver Specifications

Worx WG385.9 Information the information about the Worx WG385.9 cordless chainsaw: Introduction The Worx WG385.9 is a 40V cordless chainsaw that features a high-efficiency brushless motor, a 16-inch bar and chain, and automatic chain lubrication. It is designed for professional-grade performance and cutting capacity, and it is ideal for a variety of applications, such as cutting firewood, trimming branches, and felling trees.

Skil 3320-01 Information the information about the Skil 3320-01 drill press: Intro The Skil 3320-01 is a 10-inch drill press that is perfect for the home woodworker or hobbyist. It features a powerful 3.2-amp motor, a variable speed range of 500-3,050 RPM, and a 1/2-inch keyed chuck. The drill press also has a laser guide for precise hole alignment, a depth adjustment system, and a work surface that tilts from 0 to 45 degrees.

FLIR CM44 Information The FLIR CM44 is a professional-grade True RMS clamp meter that is designed for commercial and residential electricians. It features a bright backlit display, Accu-Tip™ technology for accurate amperage measurements on smaller-gauged wires, and MAX/MIN/AVG recording, frequency measurement, and electrical field detection. The CM44 is made with an over-molded, easy-to-grip design and is durable enough to withstand a two-meter drop. Image of FLIR CM44 True RMS Clamp Meter Specifications

Sun Joe SWJ803E Information The Sun Joe SWJ803E Electric Pole Chain Saw is a versatile tool that can be used to safely and easily trim hard-to-reach branches. It features a telescoping pole that extends from 5.8 to 8.8 feet, giving you a total of 14 feet of overhead reach. The multi-angle head can be adjusted from 0 to 30 degrees, allowing you to make precise cuts at any angle. The SWJ803E is powered by an 8-amp motor that can cut branches up to 9.5 inches thick. It also features a durable 10-inch Oregon bar and chain with an auto-oiler to keep the chain lubricated during use. Image of Sun Joe SWJ803E Electric Pole Chain Saw Specifications

Husqvarna 439 Information the information about the Husqvarna 439 chainsaw: Introduction The Husqvarna 439 is a lightweight, compact, and versatile chainsaw that is ideal for farmers, homeowners, and other users who need a tool for light cutting tasks. It features a powerful X-Torq® engine that delivers lower fuel consumption and reduced emissions, as well as Smart Start®, fuel pump, and Auto return stop switch for easier starting. The 439 also has a number of other features that make it a great choice for users who demand a high-quality chainsaw, including Air Injection™ technology, an adjustable oil pump, and a low-vibration design.

Stiga SP 386 Information The Stiga SP 386 is a powerful and lightweight chainsaw that is perfect for a variety of tasks, such as cutting firewood, trimming trees, and clearing brush. It is powered by a 38.5cc, 1.6kW engine that provides plenty of power for even the most demanding jobs. The magnesium engine cover ensures that the engine runs cool and efficiently, while the automatic oil pump ensures that the chain is always properly lubricated. The SP 386 is also equipped with a number of features that make it easy to use and maintain. The tool-less air filter cover makes it easy to access the air filter for cleaning, and the tensioning wrench located under the rear handle makes it easy to adjust the chain tension. The fuel tank level monitoring window allows you to see how much fuel is left in the tank, and the vibration control system (VCS) helps to reduce operator fatigue.

Stanley STHT77502-1 Information the information about the Stanley STHT77502-1 laser level: Introduction The Stanley STHT77502-1 is a self-leveling cross line laser level that projects a horizontal and vertical line, plus an additional 90-degree vertical line. It has a visible working range of up to 12 meters and an accuracy of +/- 5mm at 10 meters. The laser level is made of durable plastic and is IP50 rated, meaning it is protected against dust and water splashes. It comes with a quick-link bracket system, a soft pouch, and two AA batteries.

Einhell TC-TS 2025/1 UA Information The Einhell TC-TS 2025/1 UA is a powerful and versatile benchtop circular saw that is perfect for DIY enthusiasts and professionals alike. It features a 1800-watt motor that delivers smooth, precise cuts in a wide variety of materials, including wood, plastic, and metal. The saw's two-in-one blade adjustment system allows you to adjust the height and tilt of the blade, making it easy to make both bevel and miter cuts. The saw also comes with a number of other features that make it a great choice for any workshop, including: A large, aluminum worktable with guide rails A parallel stop with eccentric clamp A miter stop for +/- 60 degree angle cuts A dust extraction port with adapter A sturdy base frame for stability A cable winding system for a tidy work area Image of Einhell TC-TS 2025/1 UA Specifications

Black & Decker PP360 Information The Black & Decker PP360 is a cordless screwdriver with a rotating drive head. It is powered by a 4.8V NiCd battery and has a maximum torque of 38 in-lbs. The screwdriver features a ¼” (64mm) universal hex chuck that accepts most standard screwdriver bits. It also has a LED work light that illuminates the work area, a soft grip for comfort, and a lock/unlock mechanism for easy bit changes. Image: Specifications:

Silent Knight SD500-AIM Information the information about the Silent Knight SD500-AIM addressable input module: Introduction The Silent Knight SD500-AIM is an addressable input module that monitors for alarm contact closures and open circuit wiring fault conditions when used with pull stations, water flow switches, and other dry contact alarm initiation devices. It is compatible with Intelliknight fire alarm control panels and mounts to a 4"-square gang box.

Worx WX156 Information Intro The Worx WX156 is a 16-volt cordless drill and driver that offers a good balance of power and versatility. It's a great choice for homeowners and DIYers who need a tool that can handle a variety of tasks, from light-duty drilling to driving screws. Image

Leatherman Juice CS4 Information the Leatherman Juice CS4 information you requested: Intro The Leatherman Juice CS4 is a compact multi-tool that is perfect for everyday carry. It is lightweight and easy to use, and it has a variety of tools that make it perfect for a variety of tasks. The Juice CS4 is a popular choice for hikers, campers, and other outdoor enthusiasts, but it is also a great tool for everyday use around the home or office.

Makita GA029GD202 Information The Makita GA029GD202 is a 40V Max XGT brushless angle grinder that delivers the same power as a 1000W corded machine. It features a brushless motor which increases battery efficiency, providing longer runtime per charge and requires virtually no maintenance. The GA029GD202 also has a paddle switch for comfortable operation and a dust cover to help keep the grinder clean. Image: Specifications:

Black & Decker KR70 Information the information you requested about the Black & Decker KR70: Intro The Black & Decker KR70 is a corded hammer drill that is perfect for a variety of DIY projects. It has a powerful motor that can handle drilling through wood, masonry, and metal, and it also has a hammer function that makes it ideal for breaking through concrete and other hard materials. The KR70 is also lightweight and easy to use, making it a great choice for both professional and DIYers. Specifications Power: 750 watts Speed: 0-2,800 RPM Hammer rate: 0-45,000 BPM Chuck size: 1/2 inch Max drilling capacity: Wood: 1-1/2 inches Masonry: 1/2 inch Metal: 1/4 inch Weight: 3.5 pounds Features Powerful motor for drilling through a variety of materials Hammer function for breaking through concrete and other hard materials Lightweight and easy to use Soft grip handle for comfort and control Variable speed trigger for precise control Reverse function for driving screws Two speed sett...

Makita BDF458RFX Information The Makita BDF458RFX is a cordless drill/driver that is designed for professional use. It features a powerful 18V motor that delivers up to 58Nm of torque, making it ideal for a wide range of applications, from drilling through wood and metal to driving screws into heavy-duty materials. The BDF458RFX also features a two-speed gearbox that provides variable speed control for precise drilling and driving, as well as a 21-position torque setting that ensures optimal performance for any task. In addition, the BDF458RFX is equipped with a built-in LED work light that provides illumination in low-light conditions, and a soft-start function that prevents the tool from stalling when first engaged. Full specifications Feature Specification Motor 18V Torque 58Nm Speed 0-500/0-2000 RPM Chuck capacity 1-10mm Torque settings 21 LED work light Yes Soft-start function Yes Weight 1.6kg Dimensions 220 x 80 x 220mm Features

Makita BDF441 Information the information about the Makita BDF441: Introduction The Makita BDF441 is a cordless drill driver that is designed for professional use. It is powered by a 18V lithium-ion battery and has a maximum speed of 1,700 RPM. The BDF441 is also equipped with a 2-speed transmission, a built-in LED light, and a soft grip handle.